Blog - ACCESSEN GROUP - SHANGHAI ACCESSEN

Container heating station installation method

The container heating station is technical innovation, prefabricated in the factory, and directly installed outdoors. It can be flexibly and quickly designed and combined according to different requirements to reduce construction cost, cycle work, and promptly realize unattended heating. The design integrates all the necessary functions of the heat exchange station. Without a separate station, an intelligent control system needs to be coupled to realize the unattended outdoor operation. So it is the best choice of the modification or outdoor.

2022 Jan 19
Accessen's moveable heat exchange station

Accessen's moveable heat exchange station is a revolutionary innovation. It has an integrated design of the heat exchange station that includes all the necessary features, customized according to the different requirements. And it has the advantages of lower construction costs and cycle work to achieve nobody guarded heat supply.

2021 Dec 24
Something you should know about your plates

The heat exchanger's plate isolates the medium and exchanges heat, which is an essential part of the plate heat exchanger. The mainstream materials are Stainless Steel, Titanium and Titanium Palladium, Hastelloy, and other alloys. Each plate contains two parts:

2021 Dec 21
The inspection process before a heat exchanger is ready to go

The inspection of the plate heat exchanger mainly includes the review of raw materials, pressure tests after processes. The main contents are as follows: 1. Raw materials and spare parts size and geometry inspection of the plate heat exchanger. 2. Inspection of internal defects of raw materials and welds. The inspection method is non-destructive testing, which includes: X-ray detection, ultrasonic detection, magnetic particle detection, penetration detection, etc. 3. Weld quality testing

2021 Dec 10
The regular operation of the heat exchange system

In the use and operation process of civil and industrial conditions, the plate heat exchanger will always appear to have problems like leakage, abnormal pressure or temperature, blockage and other faults due to improper operation, material blockage, gasket aging, or equipment loss, and other factors. These problems will reduce the heat transfer efficiency of plate heat exchanger equipment, even directly leading to the use of the equipment and ultimately affecting the whole production process. Therefore, in the use of heat exchangers, it needs to configure the relevant operators or technical personnel, who should master the appropriate knowledge of the heat exchanger cleaning and maintenance, to ensure the regular operation of the heat exchange system.

2021 Dec 06
Internal leakage fault of the plate heat exchanger

The plate heat exchanger is widely used in industrial applications. Today, we will discuss how to judge and deal with the most common internal leakage fault of the plate heat exchanger and daily preventive measures. First, the user can identify the leaking unit by opening the pore and detecting the temperature of the medium at different locations.

2021 Nov 29
Accessen container heating station

Today let’s talk about the container heating station from its concept, characteristics, and representative products. A heat exchange station is a perfect heat exchange system which composed of heat exchanger, temperature control valve group, circulating pump, electric control cabinet, base frame, pipeline, valve, instrument, etc.

2021 Nov 23
Heat exchanger products introduce under the Double Carbon policy and the improvement of Voc emissions

With China's continuous implementation of the Double Carbon policy and the improvement of Voc emissions, wide gap welded plate air preheater in this industrial field is more important. It is an efficient heat exchange device for energy recovery. In the process of its operation, because of the temperature difference, the heat of two reverse flows of air exchanges through the isolation of an ultra-thin heat transfer plate.

2021 Nov 15
Heat exchange products at the heating refrigeration and technology fields

Because of the efficiency and low-cost advantage, heat exchange products can meet the requirements of different working conditions. However, the heat exchange products have other characteristics because of various application scenarios. Today, let’s talk about the standard heat exchange products from the three heating, refrigeration, and technology fields.

2021 Nov 08
The operation and maintenance of plate heat exchanger skids

With the continuous improvement of heat exchange demand and more intelligent applications, complete sets of plate heat exchange equipment are increasingly widely used. As a result, the plate heat exchanger unit is trendy because of its high heat exchange efficiency, small footprint, intelligent design, and characteristics. Today, we will talk about the daily operation and maintenance of plate heat exchanger skids.

2021 Nov 01
The contrast between plate heat exchanger and shell and tube heat exchanger

In some conditions, the plate heat exchanger can completely replace the traditional shell and tube heat exchanger. Now let us show you the way. 1. Comparison of heat transfer efficiency Cooling water inside the shell and tube cooler was on a smooth pipe wall, which usually forms the laminar flow, so the heat transfer coefficient is low. In terms of water-water working conditions, its heat transfer coefficient K value is generally 800-1200W/m2*K.

2021 Oct 23
The Application of Plate Heat Exchanger

We all know that the plate heat exchanger is widely used in heating, refrigeration, metallurgy, machinery, petroleum, chemical industry, electric power, medicine, food, chemical fiber, paper making, textile, shipping, and other sectors, mainly used for heating, cooling, evaporation, condensation, sterilization, waste heat recovery and other working conditions. And so it has suitable applications in the following industries:

2021 Oct 09
How to choose a Wide Gap Welded Plate Air Preheater

When making the selection of Wide Gap Welded Plate Air Preheater, we should pay attention to the following four points: 1. heat transfer area The heat transfer area is the primary of all heat exchanger selection. Generally, to select a wide gap welded plate air preheater, the first is to calculate the heat exchange area, which needs to be calculated according to the specific data by the manufacturer.

2021 Sep 18
Things you should know about plate air preheater

The principle of plate air preheater is to use high-temperature flue gas to heat combustion air. It has the characteristics of high heat transfer efficiency, low pressure, good long-term heat transfer, small footprint, high-temperature resistance, good corrosion resistance, long service life, Etc. And so it is widely used in drying, heating and cooling, drying and other fields.

2021 Sep 14
Accessen Prefabricated Integrated Cold Station Solutions

With the rapid development of the data center industry, the long construction periods and complex construction management of traditional freezing stations can’t meet the application requirements of high quality and fast delivery of data centers. Therefore, the lifecycle management of data centers is an inevitable trend. With rich experience, strong manufacturing, and design resources support, Accessen prefabricated integrated cold station solutions can participate in every phase of data centers and achieve positive feedback loops.

2021 Sep 13
Accessen Plate Heat Exchanger Assembly Process

Many customers haven’t been to Accessen yet, so maybe you’re not familiar with the assembly of Accessen’s plate heat exchangers. Today, we will lead you to understand the plate assembly process from a different perspective quickly. Welcome to the world of Accssen‘s Plate heat exchanger! And if you have any interest in visiting, please feel free to contact us!

2021 Sep 08
Accessen Standard Heat Exchanger Skid-God of Fire

The God of fire series standardized heat exchange skid is designed by Accessen combined with rich application experience, mainly used in the central heating industry.

2021 Aug 30
Accessen-Your Heat Exchanger Solution provider

Founded in 2002, Accessen specializes in the development and production of heat exchangers. Accessen can provide customers with on-demand heat transfer solutions, reliable equipment, and high-quality pre - and after-sales services. Two production plants are located in Shanghai and Taicang, Jiangsu province. In addition, our service network is all over the world. Our heat exchange equipment operates well worldwide. If you have any interest or need, please feel free to contact us. We are glad to provide the service for you.

2021 Aug 21
Efficient and High Quality Heat Exchangers

Accessen always aims at customer satisfaction and has provided efficient and high-quality heat exchangers to thousands of customers in various industries such as municipal heating, clean energy, building air conditioning, commercial buildings. With the sustainable development of low carbon and environmental protection in recent years, Accessen will continue to respond to national policies, adhere to the concept of green and energy-saving heat transfer, to provide customers with on-demand and energy-saving heat transfer solutions.

2021 Aug 20
Accessen manufacturer field trips

Because of COVID-19, many customers are not able to come to Accessen for field trips. This week, through the video, we will take you to look around our production workshop in Taicang, Jiangsu province.

2021 Aug 12